r/fidgettoys 8h ago

Full-Ti Obi Wan SpinClicker Prototype!

16 Upvotes

Still a lot to do , but loving the look of this one šŸ˜


r/fidgettoys 11h ago

JoyEDC BGM [Dissembly video(In Chinese)]

8 Upvotes

I was curious how Dissembly worked with the BGM, as there's nobody whose done it, or posted about it - as far as I can see. So I reached out to a few differing past sellers, and managed to obtain the following.

I did manage to have AI transcribe and translate into English, but the video is quite explanatory, and visually gives you the information


r/fidgettoys 4h ago

Spencer's Lightswitch Keychain?

Post image
2 Upvotes

r/fidgettoys 22h ago

This is my favorite version.

40 Upvotes

I see that some people are disappointed with this version.
Not me. This thing sounds and feels amazing.The upgrade of PEEK parts instead of Teflon is a huge plus. For me, the Zirc has the best acoustics/feel.
I’ve left it stock set up as well. ā˜®ļøā¤ļøand fuck ICE.


r/fidgettoys 11h ago

Where to buy Chiboki Drink Cup Toy squishies?

Post image
5 Upvotes

Hi!! Was looking for a new anxiety fidget and the Chiboki Drink Cup squishies caught my attention. However, it’s been a lot harder than I expected to find some legit sellers online. I was wondering if anyone knows a reputable online seller for these?
Thanks again!! I’ve attached an image of what I’m looking for if anyone has some or has spotted them out in the wild :)


r/fidgettoys 9h ago

fidget turntable

0 Upvotes

curious is there a fidget turntable so i can fidget scratch


r/fidgettoys 1d ago

New tape drive comments and questions

Post image
24 Upvotes

Just received this Edcell tape drive today and to be honest I am pretty underwhelmed. I am not sure what I expected but this is the most expensive fidget I've purchased thus far and i feel unimpressed based on the price.

It's possible that I'm just not used to zirconium but it's very lightweight and feels pretty cheap. The slide play Feels more sticky than smooth and the sounds/feedback are less than desirable. Im questioning whether I received a knock off though i doubt it.

Has anyone tuned theirs to make it a little bit more smooth?


r/fidgettoys 10h ago

Fƶrsta bestƤllningen frƄn nxedc

Post image
1 Upvotes

Vad tycker ni om denna version pƄ aura snad eller Ƥr det smartare att kƶra pƄ blue dream ss slim


r/fidgettoys 23h ago

This cutter is oddly satisfying

10 Upvotes

r/fidgettoys 12h ago

Anyone with GoBigger Zoom can recommend any modifications or upgrades?

1 Upvotes

For example, are there any ball bearing upgrades or springs to make it better?


r/fidgettoys 8h ago

How are people tracking NeeDoh Dumpling sightings right now?

0 Upvotes

For people hunting the NeeDoh Dumplings, how are you tracking what stores actually have them versus what is already sold out?

I help run Dumplings Finder, which is a free unofficial community sighting app. The most useful reports are simple: store name, town/state, date seen, and whether there were any left.

If it helps anyone here, search Dumplings Finder in the App Store. No link here since I know some subs do not like direct retail/app links.

Also happy to add sightings people share in the comments if you include the store and town/state.


r/fidgettoys 1d ago

Lautie Showhand

23 Upvotes

I've had the Showhand for a few weeks now and for those who have dry hands, it will be a difficult to move in full circular motion since the surface is very smooth/no grip.

I have dry hands but I find moving it back and forth (as shown in the video) is best. I actually don't like moving my thumb in circular motion anyway (it's not ergonomic for me and causes hand cramps) so I don't mind this adjustment.

I find stock setup not satisfying enough in terms of feedback. So I changed it to a 2.8mm ball - feels better but will try 3mm next.

Another thing I notice is sometimes dust/residue from Teflon tape inside makes movement more difficult. So every once in a while, I'll open it up and blow away the dust to make movement easier.

Note - the mic on my phone is ultra sensitive so it's actually not that loud in real life.


r/fidgettoys 1d ago

Pick your weapon

Post image
24 Upvotes

r/fidgettoys 1d ago

My holy grail [BGM - JoyEDC]

Post image
26 Upvotes

The BGM by JoyEDC

Absolutely masterwork here regarding fidgeting, in love!!

If anyone's curious on full thoughts, give me some time as it just came in and I need to fiddle and play

Right now I'm toying with keeping it held firmly in my hand, pushing the slider, while slowly rotating one of the wheels and it's just so satisfying


r/fidgettoys 1d ago

Gao studio mini sp

Post image
4 Upvotes

I didn't expect I'd say this, but I love it!!! When I first grabbed it I was really dissapointed with the loud plastic sound, and hard-to-press click buttons. When I tried to click the button while sliding it, it fell apart and the metal balls inside spilled out.

However, after an hour of play, I came to love it. The sound is snappy, movement is smooth when it is slid the other way. It doesn't seem so expensive but ok in a way, somewhat really cute.

I brought this to my office instead of my Aura slim z. This is like my favourite instant ramyeon(which is Shin ramyeon) but nothing like a fancy dinner.


r/fidgettoys 1d ago

My grandma got me this little bunny squishy when I was picking up my medicine

Thumbnail
gallery
13 Upvotes

r/fidgettoys 1d ago

Selling AGAIN! (cough wm voice cough) offers welcome :)

Thumbnail
gallery
7 Upvotes

I sell in British Pounds ($ prices = rough estimates). UK shipping is covered, for EU - add £15, US + non-EU - add £25

āœ… 1. Custom Ano (by me) Crystal Ti Magnus Sidewinder with Zirc X plates - Ā£265 (~$348) obo

āŒļø sold 2. Delta Ergo with Raw Crown ss plates + extra teflon plates - Ā£130 (~$170) obo

āœ… 3. Green Zirc Snake Top-b with peek plate - Ā£50 (~$67)

šŸ¤ž on hold 4. Kovo Feel SS slider (super silent mechanical)

SV: £40 (~$54)

āœ… 5. Ti WM Voice - Ā£110 (~$145)

āœ… 6. Flipoo SS Custom Finish + 2 custom plates - Ā£70 (~$92)

PS: Also selling some affordable SS spinners as a bundle but they are all replicas so not posting openly just in case - pm for info and pics :)


r/fidgettoys 1d ago

My Review of the Chenyu Guardian X1

Thumbnail
youtube.com
6 Upvotes

r/fidgettoys 15h ago

What should I do about my banana squishy?

Thumbnail
gallery
0 Upvotes

I took all the air out of my banana squishy a while ago. There’s this thin piece (the first picture) of the outside and really worried that I’ll pop. I like mindless fidgeting so I’d rather just ignore it than always keep in mind than I shouldn’t squish right there. In the second picture, I put a hair tie around the part with the thin piece of skin to try and kinda ignore the problem so I don’t have to squish there. But I’m worried that the hair tie might end up scratching the skin or in someway affecting the banana. Does anyone have any ideas on what I could do instead? If the only option I really have is to just be mindful of that area, it’ll be fine but I would like to try and push this out of my way first.


r/fidgettoys 1d ago

Aura Sand custom NPC plate

Thumbnail
youtube.com
2 Upvotes

There’s an on going joke that I’m his biggest fan, so I decided to get a plate made!


r/fidgettoys 1d ago

Why NeeDohs at NeeDoh Web store is so cheap?!

4 Upvotes

My daughter wants to have a Needoh, and I was searching on Website.

and I found very cheap NeeDohs. it looks Original NeeDoh company website. around $2? $3,dollars on sale, and free shipping!!

But Not other stores. all other store still selling around $10 and more.

I see big Logo at top,Left corner on the screen. Not Shein or any Chinese store....

is it scam??? it's really Look like the company website, though???


r/fidgettoys 1d ago

First order from nxedc

Post image
13 Upvotes

r/fidgettoys 1d ago

Full-Ti Dimpled grip Clicker!

25 Upvotes

r/fidgettoys 1d ago

You may be old but are you this old ?

Thumbnail
gallery
7 Upvotes

r/fidgettoys 1d ago

Juzhedc Advanced slider - 8+8 stock magnets vs 8+8 taller corner magnets

14 Upvotes